{"product_id":"hawk-performance-hb119v-594","title":"Hawk Performance HB119V.594 Hawk 78-87 Buick Regal DTC-50 Front Brake Pads","description":"\u003ch2\u003eHawk Performance HB119V.594 DTC-50\u003c\/h2\u003e\u003cp\u003eThe Hawk DTC-50 compound is what racers have been asking for: a pad that can be used as a split compound for tuning, and an endurance compound that can be used at the highest levels of racing. DTC-50 was developed through extensive testing, giving racers a pad that enhances our line of Dynamic Torque Control products and bridges the temperature and brake torque range between our current DTC-30 to DTC-60 race pads. This new compound offers consistent performance across a wide range of temperatures, while providing very high torque and aggressive initial bite.\u003c\/p\u003e\u003ch2\u003eHawk Performance DTC-50 Race Compound Characteristics:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVery High Torque\u003c\/li\u003e\n\u003cli\u003eAggressive Initial Bite\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eHigh Temperature Fade Resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for High Deceleration Rates\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" alt=\"Hawk Performance Race Compound Chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_DTC_50_Characteristics.jpg?v=1616709624\" alt=\"Hawk Performance DTC-50 Characteristics\"\u003e\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":46058047176862,"sku":"BR-HB119V.594","price":179.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/7515\/5614\/files\/Hawk_Performance_HB119V.594.jpg?v=1763862829","url":"https:\/\/pegasuspowersports.com\/products\/hawk-performance-hb119v-594","provider":"Pegasus Powersports","version":"1.0","type":"link"}