{"product_id":"hawk-performance-hb805w-615","title":"Hawk Performance HB805W.615 Hawk 15-17 Ford Mustang Brembo Package DTC-30 Front Brake Pads","description":"\u003ch2\u003eHawk Performance HB805W.615 DTC-30\u003c\/h2\u003e\u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e\u003ch2\u003eHawk Performance DTC-30 Race Compound Characteristics:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e\n\u003cli\u003eEffective when Cold\u003c\/li\u003e\n\u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" alt=\"Hawk Performance Race Compound Chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_DTC_30_Characteristics.jpg?v=1616709624\" alt=\"Hawk Performance DTC-30 Characteristics\"\u003e\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":46058093576350,"sku":"BR-HB805W.615","price":250.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/7515\/5614\/files\/Hawk_Performance_HB805W.615.jpg?v=1763863395","url":"https:\/\/pegasuspowersports.com\/products\/hawk-performance-hb805w-615","provider":"Pegasus Powersports","version":"1.0","type":"link"}